HOPPE HLS9000 Euro-Style Multipoint Locks — OEM Replacement Parts
2 subcategories — 11 SKUs
HOPPE HLS9000 euro-style multipoint locks deliver multi-point locking on hinged doors via integrated cam and hook mechanisms. Contractors, glaziers, and service technicians stock these for residential and light commercial replacement installations requiring positive security and smooth operating action.
HOPPE Multipoint Replacement Lock Cases
HOPPE Single Point Mortise Locks
16mm Hoppe Single Point Lock (SPL), 35/92 Gear, 1/2" (14mm) Deadbolt throw
Hoppe Mortise Lock, Manual Single Point, 35mm Backset, 92mm PZ
16mm Hoppe 45/92, 1-3/4" Backset Single Point Lock (SPL) 1/2" Deadbolt
Hoppe Mortise Lock, 1" Deadbolt throw, 45/92 Single Point Lock (SPL), Rotation Limiter
Hoppe Mortise Lock, 1" Deadbolt throw, 60/92 Single Point Lock (SPL), Rotation Limiter
Hoppe Mortise Lock, 16mm 70/92 Single Point Lock (SPL) 1" Deadbolt, new style Rotation Limiter
22mm Hoppe Single Point Lock 1-3/8" Backset
HLS9000 SWD Multipoint Operational Sticker, Right Hand, English, 3.5" x 11"
HLS9000 SWD Multipoint Operational Sticker, Left Hand, English, 3.5" x 11"
16mm Fuhr 35/92 Mortise Lock, Single Point
HLS9000 Specifications and Compatibility Requirements
The HLS9000 series handles door widths from 36" to 48" and integrates with standard euro cylinders and lever handle hardware. During retrofit work, verify existing lock case dimensions, backset measurement, and cylinder type before ordering. Shootbolt and roller configurations accommodate different frame depths and closing forces common in contemporary hinged door installations.
Identify Your Exact Lock Configuration
HLS9000 locks mount within door edge cavities via mortise installation. Confirm whether your application requires shootbolt, roller, or tongue bolt engagement, then match backset (typically 35mm or 45mm) and case length. Measure from lock centerline to nearest edge; incorrect specification results in misaligned strike plates and binding bolt travel.
Cylinder Type and Handle Set Coordination
HLS9000 locks accept standard euro profile cylinders (typically 30/30 or 30/35mm configurations). Coordinate cylinder trim with your lever handle selection—backplate alignment and trim ring depth must accommodate case projection. Common installation errors stem from mixing metric and imperial hardware; verify all specifications in millimeters before assembly.
Trade Volume and Technical Support
All About Doors maintains 11 HLS9000 SKUs covering standard configurations and trim variations. Trade accounts benefit from cross-reference data linking case type to compatible cylinder, handle, and accessory components. Technical specs available for pre-job planning; expedite multi-unit orders for new construction kits and retrofit projects.